Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Chongqing' for 'CST/8.0/no DST' instead in /usr/local/www/lifetype/class/data/Date.class.php on line 240
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Chongqing' for 'CST/8.0/no DST' instead in /usr/local/www/lifetype/class/locale/locale.class.php on line 505
四月
Warning: mktime() [function.mktime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Chongqing' for 'CST/8.0/no DST' instead in /usr/local/www/lifetype/class/data/Date.class.php on line 240
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Chongqing' for 'CST/8.0/no DST' instead in /usr/local/www/lifetype/class/locale/locale.class.php on line 505
10
FreeBSD Ports 的管理
Deprecated: Function set_magic_quotes_runtime() is deprecated in /usr/local/www/lifetype/class/cache/Cache_Lite/Lite.php on line 717
Deprecated: Function set_magic_quotes_runtime() is deprecated in /usr/local/www/lifetype/class/cache/Cache_Lite/Lite.php on line 727
FreeBSD 引用 (0)
來源:資訊隨筆 (http://140.111.152.155/blog/post/2/251)
要執行底下的動作時，都要切換到該軟體在 Ports 的目錄之下
1.安裝軟體
make install：會自動執行所有的編譯原始碼及設定工作。
2.Ports 選擇套件要編譯時的參數
make config : 選擇套件要編譯時的參數
3.移除軟體
make deinstall：可以移除不要安裝的軟體。
4.重新安裝軟體
make reinstall：重新安裝軟體，執行之前要先用 make deinstall 先把軟體移除。
5.移除 work 目錄中的檔案
make clean：在安裝過程中，在 work 目錄中會有一些檔案，因為安裝完成之後就用不到了，所以可以用 make clean 指令將這些檔案刪除。
make distclean：軟體安裝時，會在 /usr/ports/distfiles 下載一些軟體的原始程式碼，下次軟體在安裝時會檢查這裡是不是有需要的原始程式碼，如果您的空間不夠用，就可以把這些檔案清除。
7.make install clean：安裝軟體完畢後，馬上移除 work 目錄中的檔案，將所有編譯的記錄給清除掉。
8.make unstall clean distclean：安裝軟體完畢後，馬上移除 work 目錄中的檔案，將所編譯的記錄給清除掉，再接著把 /usr/ports/distfiles 目錄中的檔案刪除。
如果您當時在安裝軟體時，並沒有加上 clean，之後想要把這些散落在各個軟體目錄之下的 work 目錄清除時，可以用下列的指令：
# find /usr/ports -depth -name work -exec rm -rf {} \;